Introduction
We have done several interesting projects. So, today we will do one more interesting science project. Thus, in the following article, we will learn about the electric cycle bell, and we will also build it stepwise in a simplified manner.
Supplies
In this step, take a notepad and start noting down the list of supplies required for making the electric cycle bell project.
Materials
- Connector
- Pulli
- Cycle Bell
- Nut Bolt
- Switch
- DC Motor
- 7 V Battery
- Board
- Glue
- Plastic Pipe
Steps To Make Electric Cycle Bell For Science Project
Step 1: Firstly, take a board and place it on the table or a surface.
Take a Board
Step 2: Fix the nut bolt inside the cycle bell.
Fixing the Nut Bolt
Step 3: Apply glue and stick the bell on the top right corner of the board.
Placing the Bell
Step 4: Take a small plastic pipe and stick it next to the bell.
Placing the Small Plastic Pipe
Step 5: Now, take the motor and stick the wires on both ends.
Placing the Motor
Step 6: Apply glue and stick the motor on the plastic pipe.
Placing the Motor
Step 7: The following step is to connect the wire with a nut and then attach it with the battery and nut, as shown below.
Connecting the Wire
Step 8: Take a 3.7 V Battery, stick it on the board and then join one end of the wire as shown below.
Connecting the Battery
Step 9: In the next step, take a switch and connect the remaining wires to it.
Connecting the Remaining Wires
Step 10: The last step of this experiment is to turn the Switch On.
Electric Cycle Bell
Things To Remember
- Make sure the nut bolt fitted inside the cycle bell is tight.
- Make sure you apply the glue appropriately and let it dry.
Saquib Siddiqui is a Mechanical Engineer and a content creator. He has special interest in science experiments and teaches the same to school and college students. He is also a technical lead at RUDE LABS PVT. LTD.
0 Comments