Introduction
In this tutorial, we will show you how to make a fidget spinner vending machine for your science project using readily available material at home.
Supplies
To make the fidget spinner vending machine, we need some supplies which are listed below:
Tools
- Hot glue gun
- Cutter
Materials
- Ice cream sticks
- Rubber band
- Transparent sheet
- Chopstick or bamboo stick
- Cardboard
- 15×16 cm (4 pieces)
- 6× 9.5 cm (2 pieces)
- 6× 10.5 cm (1 piece)
- 11× 16.5 cm ( 1 piece)
- 5 × 15 cm (3 pieces)
- 5× 16 cm (2 pieces)
- 15× 20 cm ( 2 pieces)
- 15× 17 cm (2 Pieces)
- 16× 20 cm (2 Pieces)
- 8×14×16 cm ( 2 triangle pieces)
- Spinners
Steps To Make A Fidget Spinner Vending Machine
To make a fidget spinner vending machine, Just follow these steps carefully.
Step 1: Cut the Cardboard (as shown in the picture).
Cutting the cardboard
Step 2: Add these pictures making a hut-shaped using a hot glue gun.
Making hut shape from cardboard
Step 3: Paste the ice cream sticks in the bottom.
Step 4: Cut the cardboard pieces and make a structure as shown in the picture below.
Making vending machine structure
Step 5: Cut this cardboard and paste it on both edges of the cardboard.
Step 6: Paste the hut structure in it.
Step 7: Fix the bamboo stick (as shown in the picture) and paste with the glue gun.
Step 8: Paste a wooden piece on both sides of the board and fix the rubber band in it.
Step 9: Cut the cardboard in these measures (as shown in the picture).
Step 10: Paste the transparent sheet in it and paste it into the cardboard.
Step 11: Paste the cardboard to make a hut structure and paste it slightly bent.
Step 12: Paste the cardboard to cover the structure, on the top and bottom.
Step 13: Paste the piece of bamboo sticks on the top.
Vending machine box layout
Step 14: Paste the spinner on the triangle.
Attaching fidget spinner
Step 15: You can also paste the ice cream stick ‘the mini gear’ written on it.
Naming your vending machine
Step 16: Put all the new spinner boxes on the top.
Step 17: When you put the spinner and triangle, the spinner vending machine starts working and the new box comes out.
The fidget spinner vending machine is ready.
Things To Remember
- Be careful while making this model.
- Use the leftover crafts material from the previous crafts.

Cisco Ramon is an American software engineer who has experience in several popular and commercially successful programming languages and development tools. He has been writing content since last 5 years. He is a Senior Manager at Rude Labs Pvt. Ltd.
0 Comments