Introduction

Many of us are Iron Man, and the Iron Man Arc Reactor is one of the coolest items. So, in today’s article, we will teach you how to make an iron man arc reactor. So, let us begin the exciting journey.

Supplies

Now, let us look at the requirements required to make an Iron Man Arc Reactor. They are as follows:

Tools

• Hard Glue
• Glue Stick
• Pencil
• Cutter or Knife
• String

Materials

• Iron Man Arc Design
• Cardboard
• White Paper
• Silver Spray Paint
• Finger Lights
• Cardboard Ring

Steps To Make Iron Man Arc Reactor

Step 1: The first step is to trace two designs of the Iron Man reactor on a piece of cardboard.

Tracing the Design

Step 2: The second step is to remove the traced outline.

Removing the Tracings

Step 3: The third step is to cut the traced design with the help of a cutter or knife.

Cutting the Traced Design

Step 4: Now, place and adjust the traced triangle design over each other.

Adjusting the Designs

Step 5: The following step is to apply hard glue on the top layer and then stick both the layers.

Sticking the Layers

Step 6: Apply a coat of silver spray paint to the arc.

Applying the Spray Paint

Step 7: Take a simple white piece of paper and stick it over the triangle located in the middle.

Sticking the White Paper

Step 8: Simultaneously, cover all the sides of the Arc with white paper.

Covering All Sides

Step 9: The next step is to stick the paper at the back to cover the entire section of the Iron Man Arc Reactor.

Covering the Backside

Step 10: Now, cut the cardboard in a circular shape

Cutting the Circular Cardboard

Step 11: Place the finger lights on the circular cardboard and mark its outline

Placing the Finger Lights

Step 12: Then, mark some tiny holes and place the finger lights. Once you adjust them, tie the finger lights by using thread.

Tying the Finger Lights

Step 13: Take a cardboard ring and then stick the Iron Man Arc over it.

Sticking the Iron Man Arc on Cardboard Ring

Step 14: Now, turn on the lights at the backend and stick them on the other side of the cardboard ring.

Sticking the Finger Lights at Back

Step 15: The last step is to turn the room dark and enjoy the Iron Man Arc

Iron Man Arc Reactor

Recommendation

• You can use the tapering as the cardboard ring to stick the Iron Man Arc.

Things To Remember

• Make sure you evenly apply the silver spray paint coat
• Make sure you stick the white paper appropriately, and it should be of appropriate size

Saquib Siddiqui

Saquib Siddiqui is a Mechanical Engineer and a content creator. He has special interest in science experiments and teaches the same to school and college students. He is also a technical lead at RUDE LABS PVT. LTD.