How To Make Plywood Slippers

by | Apr 16, 2022 | DIY, Wood Work

Introduction

Hello readers, today we see a new trend popularizing: plywood slippers or wooden slippers. So, today we accept this challenge and thus, we will learn how to make plywood slippers. Let us begin.

Supplies

Let us have a look at the list of supplies that you should have to make plywood slippers. They are as follows:

Tools

  • Pencil
  • Hacksaw or Jigsaw
  • Sandpaper
  • Goggles
  • Gloves
  • Drill Machine
  • Scissors

Materials

  • Plywood
  • Cardboard or Paper
  • Soft Cotton Rope

Steps To Make Plywood Slippers

Step 1: The first step is to trace the feet on the cardboard or paper.

Tracing the Feet Design on Cardboard or Paper

Step 2: The second step is to smooth the traced design with the help of a pencil.

Smoothing the Design

Step 3: Once the drawing is completed, slowly start cutting the design traced on the cardboard or paper.

Cutting the Foot Prints

Step 4: The following step is to trace the design on the wooden plywood, and once it is done, cut the wooden plywood.

Cutting the Plywood

Step 5: Now, take sandpaper and smooth the edges of the slipper.

Smoothing the Wood

Step 6: Now, depending upon your feet, mark the holes. One hole should be in between the thumbs and fingers; two holes should be on the sides.

Marking the Holes

Step 7: Once you are done marking the holes now, your role is to drill the holes.

Drilling Holes

Drilling the Holes

Step 8: The last step is to take some soft cotton thread and put it inside the holes, and once you adjust it, tie the knot.

Putting Rope

Plywood Slippers

Recommendation

  • While marking the holes, you can refer to your regular slippers and mark.
  • You can design and paint the slippers according to your Wishlist

Things To Remember

  • Make sure you appropriately drill the holes
  • Ensure you wear all the safety gear before drilling the holes

 

You May Also Like To Create…

0 Comments

Submit a Comment

Your email address will not be published.